Advertisement
OPERATING INSTRUCTIONS
HOW TO HOT FROTH AND BREW
(*Requires glass frothing mug.)
1.
Lift up water tank lid to place water level indicator inside.
2.
Paying attention to water levels, pour in desired amount of water.
NOTE: For best results, we recommend 8 oz filtered water.
3.
Plug in Froth + Brew™ .
NOTE: All buttons will blink once, indicating Froth + Brew™ is on.
4.
To open brew chamber, push lid release button.
5.
Add K-Cup
6.
Push down brew chamber lid to close.
7.
Pour desired amount of milk into glass frothing mug. Do not fill above
LATTE/MAX line.
8.
Place frothing mug under drip spout.
9.
Press Brew button.
NOTE: Brew button will illuminate, and Hot Froth will blink.
11
or coffee grounds. (Refer back to page 7-8).
®
Advertisement
