Advertisement
OPERATING INSTRUCTIONS
HOW TO BREW WITH A K-CUP
1.
Lift up water tank lid to place water level indicator inside.
2.
Paying attention to water levels, pour in desired amount of water.
NOTE: For best results, we recommend 8 oz filtered water.
3.
Plug in Froth + Brew™
NOTE: All buttons will blink once, indicating Froth + Brew™ is on.
4.
To open brew chamber, push lid release button.
5.
Insert K-Cup
NOTE: Do not remove foil lid on K-Cup
6.
Push down brew chamber lid to close.
7.
Place included glass frothing mug or travel mug underneath drip spout.
8.
Press Brew button.
NOTE: Brew button will illuminate. Hot Froth button blinks indicating it
can be selected as well. See "How to Hot Froth and Brew" for instructions.
NOTE: To cancel brewing cycle, press Brew button again.
9.
Coffee will dispense into glass frothing mug or travel mug.
10.
Brew button will blink, indicating cycle is almost finished.
11.
Once the Brew button turns off, carefully remove mug and enjoy!
12.
Always remove and dispose of K-Cup
7
®
into coffee pod holder in brew chamber.
®
.
®
after brewing.
®
Advertisement
