Advertisement
OPERATING INSTRUCTIONS
HOW TO BREW WITH COFFEE GROUNDS
1.
Lift up water tank lid to place water level indicator inside.
2.
Paying attention to water levels, pour in desired amount of water.
NOTE: For best results, we recommend 8 oz filtered water.
3.
Plug in Froth + Brew™ .
NOTE: All buttons will blink once indicating Froth + Brew™ is on.
4.
To open brew chamber, push lid release button.
5.
Pull up "Open" tab on reusable coffee filter.
6.
Add 1 tbsp coffee grounds.
7.
Snap filter closed. Wipe away excess coffee from rim of filter.
8.
Insert filter into coffee pod holder in brew chamber.
9.
Push down brew chamber lid to close.
10.
Place included glass frothing mug or travel mug under drip spout.
11.
Press Brew button.
NOTE: Brew button illuminates. Hot Froth button blinks indicating it can be
selected as well. See "How to Hot Froth and Brew" for instructions.
NOTE: To cancel brewing cycle, press Brew button again.
12.
Coffee will dispense into glass frothing mug or travel mug.
13.
Brew button will blink, indicating cycle is almost finished.
14.
Once the Brew button turns off, carefully remove mug and enjoy!
15.
Always remove and dispose of coffee grounds after brewing.
8
Advertisement
