Disable Or Remove Certificates; About Bluetooth Communications - Honeywell Dolphin CT60 Series User Manual

3. Tap Settings
4. Tap Install certificate.
5. Select either CA certificate, VPN and app user certificate or Wi-Fi certificate.
6. Tap the Menu icon
7. Tap the certificate or key store to install it. If prompted, enter the key store
8. Enter a name for the certificate and tap OK.

Disable or Remove Certificates

If a user or system certificate is compromised, or your organization chooses not to
trust it, you can disable or remove the certificate.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap the name of the certificate that you want to disable or remove. The Security
4. Scroll to the bottom of the screen and tap Disable (for System certificates) or
5. Tap OK.
Note: You can enable a disabled System certificate but if you remove a User certificate, you
must install it again to enable it.

About Bluetooth Communications

Your mobile computer is equipped to communicate with other devices using
Bluetooth technology. The Bluetooth radio must be turned on to discover, pair and
connect to other Bluetooth devices. System bar icons indicate Bluetooth radio
status.
Dolphin CT60/CT60 XP Mobile Computer User Guide
> Security > Encryption & credentials.
certificate.
password and tap OK.
> Security > Encryption & credentials.
The trusted credentials screen has two tabs:
• System shows Certificate Authorities (CA) certificates permanently installed
on the computer. They can only be disabled.
• User shows CA certificates you have installed yourself. You can remove these
certificates.
certificate screen appears.
Remove (for User certificates).
, and then navigate to the location where you saved the
79