Change The Battery Status Led Behavior - Honeywell Dolphin CT60 Series User Manual

Icon
The Battery status LED in the upper right corner of the computer indicates the
charging status of the battery.
Honeywell Battery LED Behavior (Factory Default/Out-of-Box Configuration)
Connected to Power
No
No
Yes
Yes
Yes
Either

Change the Battery Status LED Behavior

You can change the behavior of the Battery status LED if the out-of-box behavior
for a charging battery (blinking green) is not acceptable to your environment.
You can choose one of three options:
•
•
•
Use the Default Battery LED setting if you want the status LED to turn on steady
amber and then steady green when charging. To learn more about this option, see
Default Battery LED Behavior (Optional Android OS
10
Status
The battery is critically low. You need to replace the battery now or connect the computer
to a charging accessory.
The computer is connected to external power and the battery is charging.
There is a battery error. Install another battery. If the problem persists, contact
Assistance.
Battery LED
Default Battery LED (optional Android OS configuration)
Honeywell Battery LED (factory default, out-of-box configuration)
No Battery LED
LED State
Blinking amber
Off
Steady amber
Blinking green
Steady green
Blinking red
Dolphin CT60/CT60 XP Mobile Computer User Guide
Description
Battery level is below 20%
Battery level is more than 20%
Battery level is between 0% and 60%
Battery level is between 60% and 95%
Battery level is above 95%
Battery error
Configuration).
Technical