Panasonic LUMIX DC-GH6 Owner's Manual page 636

Wi-Fi / Bluetooth – Connecting to a Smartphone
Using Password Authentication to Connect
You can enhance Wi-Fi connection security by using password
authentication through either QR code or manual input.
Scanning QR code to connect
1 Set [Wi-Fi Password] on the camera to [ON].
•
[
2 Display the QR code (C).
•
[
[Control With Smartphone]
•
You can also perform the same operation by pressing the Fn button assigned
with [Wi-Fi]. (
•
Press
3 On the smartphone, start up "LUMIX Sync".
•
If a message is displayed indicating that the smartphone is searching for
cameras, close the message.
4 Select [
5 Select [Wi-Fi connection].
6 Select [QR code].
7 Scan the QR code displayed on the screen of the camera using "LUMIX Sync".
•
(iOS devices) When a message to confirm the change of destination is
displayed, select [Join].
] [ ] [Wi-Fi]
] [ ] [Wi-Fi]
Fn Buttons:
or to enlarge the QR code.
(C)
].
[Wi-Fi Setup]
[Wi-Fi Function]
517)
636
[Wi-Fi Password]
[New Connection]
[ON]