Special Video Recording – Log Recording
Reading LUT Files
•
The following LUT data can be used:
– The ".vlt" format, which meets the requirements specified in the "VARICAM
3DLUT REFERENCE MANUAL Rev.1.0"
– The ".cube" format
•
The ".cube" format LUT files are compatible with 17 point and 33 point 3D LUT.
•
The number of characters that can be used in a file name differs depending on
the file system of the card.
(Use alphanumeric characters for the file name)
FAT32 (SD card/SDHC card): Up to 8 characters (excluding extension).
exFAT (CFexpress card/SDXC card): Up to 255 characters (including
extension).
•
Save the LUT data with a file extension of ".vlt" or ".cube" in the root directory of
the card (the folder opened when the card is opened on a PC).
1
Insert a card on which LUT data is saved into the camera.
2
Select [Read LUT File].
•
[
1(CFexpress)]/[Card Slot 2(SD)]
3
Press 34 to select the LUT data to read and then press
4
Press 34 to select the location to register the data, and then press
.
•
When registered items are selected, they will be overwritten.
]
[
]
[V-Log View Assist]
[Read LUT File]
434
[Card Slot
or
.
or