Panasonic LUMIX DC-GH6 Owner's Manual page 566

Camera Customization – [Custom] Menu
[Histogram]
[ON] / [OFF]
This displays the histogram.
Turning this [ON] displays the histogram transition screen.
Press 3421 to set the position.
Positions can be moved to the diagonal directions using the joystick.
•
You can also move the position by dragging the histogram on the recording
screen.
•
A histogram is a graph that displays brightness along the horizontal axis, and the
number of pixels at each brightness level on the vertical axis.
By looking at the distribution of the graph, you can determine the current
exposure.
(A)
(A) Dark
(B) Bright
•
When the recorded image and the histogram do not match each other under the
following conditions, the histogram is displayed in orange:
– During exposure compensation
– When the flash fires
– When the standard exposure is not achieved, such as in low light situations.
•
When the following function is being used, the [Histogram] is not available:
– [WFM/Vector Scope]
•
The histogram is an approximation in the recording mode.
(B)
566