Page 1
VACUUM CLEANER OPERATION INSTRUCTIONS MANUAL M100-B Jiangsu Midea Cleaning Appliances Co.,Ltd No.39 Caohu Avenue, Xiangcheng Economic Development Zone, Suzhou , Jiangsu Province, 215131, P.R.C http://www.midea.com/global Please read this Instruction Manual carefully before operating, and keep it properly.
Page 2
7. The power cord of the vacuum cleaner can not be Safety Introduction contacted with sharp objects to avoid damage; Contents Product Introduction 8. Do not use the vacuum cleaner in the water, avoid Product Operation the heat source or exposure, prevent the fire; Product Maintenance 9.
Page 3
Product Introduction Main body Hose Plastic double pipe Main brush Combination suction brush...
Page 4
Product Operation Pull out the power cord to connect the power: When you see the red marking on the power cord, don't pull it out any more. Illustration of the main unit Connect the hose accessories: insert the hose end into the hose socket at the dust cup and then hook it. Remove the hose accessories: rotate the hose at both side and then pull the hose accessories.
Page 5
TROUBLESHOOTING Product Maintenance In case of malfunction, please refer to the following table Dust cup cleanning Problem Possible reason Solution Suction abate - Cup full of dust - Clean up the dust cup Remove the dust cup: press the dust cup to release the key, gently pull the dust cup handle, emove the dust cup;...
Need help?
Do you have a question about the M100-B and is the answer not in the manual?
Questions and answers