Siruba D007S Manual page 27

g. Press S key to save and confirm.
B).
The adjustment method to adjust the value to be "lower" than the originally preset value:
For example: To decrease the factory preset value【01】 【45】from 4500 to 4000:
(After following the instruction in section (4) or (5) in chapter 5 to access the display of "value zone",
subsequently conduct the adjustment of its value according to the following procedure.)
d. Press P key to enter the value zone of
【01】.
f. Press the P key to adjust. As there is
only one rolling direction, when the
maximum speed is
exceeded, it will return to the low
speed value. Then, adjust to【40】.
h. Return to the operation display of 【Normal Mode】.
e. Press S key to enter【45】.
g. Press S key to save and
confirm.
11
h. Return to the operation display
of 【Normal Mode】