Display Mode Of Led Display; Operation Procedure To Access Display Zone Of The First Stage Of 【Parameter Mode A - Siruba D007S Manual

5. Display mode of LED Display:

(1). Functions and definition of keys of control panel in the display zone of 【Normal Mode】 :
Needle cooling
LED light
Motor rotation
(2). Operation procedure to access display zone of the first stage of 【Parameter Mode A】 :
(Only parameter codes: 01～46 available for selection in Zone A)
a. Under the display zone of
【Normal mode】 , press P key to access
the display of first parameter code
【01】of 【Mode A】.
.
.
b. Subsequently, press P key to access
the required parameter sequence no.
eg.:【05】.
c. Press S key to access the display
zone of the corresponding 【parameter
value】
8
Needle up/down
Slow start
d. After accessing the zone of
parameter value, press P key again to
adjust the required value.
e. Press S key to return to operation
zone after saving the value.