How To Change Solenoid Supply Voltage (Dc: 24 V Or 30 V) - Siruba D007S Manual

R
S
T

(4). How to change solenoid supply voltage (DC: 24 V OR 30 V):

The JP4 is for 30 V and 24 V.
Caution:
Caution:
Please switch off the power supply before
opening the control box cover
Perform the following plug-in actions only
after about 5 minutes.
Main board layout:
HSV-MC122229
HSV-MC122237
30 V jumper setting
Before making the switch, check the machine head's Solenoid specification.
6
High Voltage inside
24 V jumper setting