Safety Precaution; Safety Of Working Environment; Safety Precaution Of Installation - Siruba D007S Manual

1. Safety Precaution:

Before operation, please read this technical document and related manual of
the machine head carefully and operate properly. Furthermore, installation and
operation should be done by trained personnel.
When operating and installing TD Servo Motor series control box, please observe the following
precautions. This driving product is only suitable for a specific range of sewing machines and must not
be used for other purposes.

1.1 Safety of working environment:

(1).
Power voltage:
The power voltage applied should be within the range of ±10 % of the specification on the name
plate of the control box.
(2). Interference of electromagnetic waves:
Keep away from the high frequency magnetic wave devices/ transmitters to avoid the resulting
electromagnetic waves from affecting this driving equipment, leading to abnormal operation.
(3). Temperature:
a. Please don't operate in places with room temperature above 45°C or below 5°C.
b. Please don't operate in places under direct sun light or outdoors.
c. Please don't operate near the heater.
d. Please don't operate in places with relative humidity below 30 % or above 95% or places with
dew.
(4). Ambience:
a. Please don't operate in dusty places, places with corrosive materials.
b. Please don't operate in places with volatile gases.

1.2 Safety Precaution of Installation:

(1). Motor and control box: please follow the instruction in this manual for proper installation.
(2). Accessories: When installing other optional parts or accessories, please turn off the power switch
and remove the plug from outlet.
(3). Power cable:
a. Avoid external objects on power cord or excessive distortion of power cord.
b. When attaching the power cord, avoid getting near the rotating pulley and V-belt (Separation
distance should be at least 3 cm away.)
c. When plugging the cord into the outlet, ensure that the power voltage applied should be within
the range of ±10 % of the specification on the name plates of the control box.
Interference
Keep away
1