Locking Power Cord - For Iec Type Ats Pdu; Input Power Cord; Output Power Cord - CyberPower PDU84001 User Manual

Installation Guide

Locking Power Cord - For IEC Type ATS PDU

Input Power Cord

Step 1. Align and insert the Cable Tie from the upper side of the Fixed Stand
and fasten it as shown below.
Step 2. Align and insert the Cable Tie from the bottom side of the Fixed
Stand and fasten it as shown below.

Output Power Cord

Step 1. Align and insert the Cable Tie from the upper side of the Fixed Stand
and fasten it as shown below.
18