Front Mounting - CyberPower PDU84001 User Manual

Installation Guide
Please only use the provided screws for the entire installation process.

Front Mounting

For 1U Models
Step 1. Mounting Bracket Installation
Use the provided Mounting Bracket Screws (16) to attach the
Mounting Brackets (2) to the ATS PDU.
Step 2. Cord Retention Tray Installation (optional)
Adjust the length of the Cord Retention Tray till the screw hole on the
Tray and ATS PDU are aligned. Attach the Cord Retention Tray to the
ATS PDU with the 4 supplied Cord Retention Tray Mounting Screws.
Tighten the Cord Retention Tray with the screw on it.
Step 3. ATS PDU Mounting
Use the provided Washers (4) and Screws (4) to secure the ATS PDU
to your existing rack system.
Note: You may also use the screw sets provided by the rack to secure
the ATS PDU.
11