18
en | Rack installation
5
Rack installation
This section provides information on installing the chassis into a rack unit. There are a variety
of rack units on the market, which may mean the assembly procedure will differ slightly. Also
refer to the installation instructions that came with the rack unit you are using.
Notice!
i
This rail will fit a rack between 26" and 33.5" deep.
5.1
Identifying the sections of the rack rails
The chassis package includes two rail assemblies, one designed and labeled for each side of
the chassis. Each assembly consists of an inner rail that secures directly to the chassis, and an
outer rail that secures to the rack. The outer rail has two sections that can slide and adjust to
fit your rack depth.
5.2
Separating the sections of the rack rails
The chassis package includes two rail assemblies in the rack mounting kit. Each assembly
consists of two sections:
–
–
To separate the inner and outer rails:
1.
2.
2021.10 | V02 | DOC
1
1
Right side inner rail
an inner fixed chassis rail that secures directly to the chassis
an outer fixed rack rail that secures directly to the rack itself.
Locate the rail assembly in the chassis packaging.
Extend the rail assembly by pulling it outward.
2
2
Quick installation guide
DIVAR IP all-in-one 7000 3U
Right side outer rail
Bosch Security Systems B.V.