Table of Contents
Advertisement
5. Memory modules
7. Keyboard-backlight FFC connector
9. Touchpad FFC connector
11. Wireless connector
13. Solid-state drive connector
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
Steps
1. Remove the two (M2.5x5) screws from the right hinge.
2. Pry open the right-display hinge at an angle of 90 degrees.
3. Disconnect the following cables from the system board:
a. I/O board Flexible Flat cable
b. Speaker cable
6. Keyboard FFC connector
8. Battery connector
10. Hard drive FFC connector
12. Speaker cable connector
Removing and installing components
75
Advertisement
Table of Contents
