Camera Module; Removing The Camera Module - Dell Inspiron 15 3525 Service Manual

4. Install the three (M2.5x3.8) screws to secure the hinge to the display panel and back cover.
Next steps
1. Install the display bezel.
2. Install the hinge caps.
3. Install the display assembly.
4. Install the wireless card.
5. Install the base cover.
6. Install the SD card.
7. Follow the procedure in

Camera module

Removing the camera module

Prerequisites
NOTE: This procedure is applicable for systems with a plastic chassis only.
1. Follow the procedure in
2. Remove the SD card.
3. Remove the base cover.
4. Remove the wireless card.
5. Remove the display assembly.
6. Remove the display hinge
7. Remove the display bezel.
8. Remove the display hinges.
9. Remove the display panel.
About this task
The following images indicate the location of the camera module and provide a visual representation of the removal procedure.
Steps
1. Using the pull tab, disconnect the camera cable from the camera module.
2. Using a plastic scribe, pry the camera module from the display assembly.
After working inside your
Before working inside your
caps.
computer.
computer.
Removing and installing components 67