Touchpad
Removing the touchpad
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the
3-cell battery
About this task
The following images indicate the location of the touchpad and provide a visual representation of the removal procedure.
Steps
1. Open the latch and disconnect the hard drive cable from the connector on the system board.
2. Remove the three (M2x2) screws that secure the touchpad bracket to the palm-rest and keyboard assembly.
3. Lift the touchpad bracket off the touchpad.
72
Removing and installing components
Before working inside your
or
4-cell battery
(whichever applicable).
computer.