Table of Contents
Advertisement
Installing the Secure Digital card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
Steps
Slide the secure digital into the slot until it clicks into place.
Next steps
1. Follow the procedure in
Base cover
Removing the base cover
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
About this task
NOTE:
Before removing the base cover, ensure that there is no SD card installed in the SD card slot on your computer.
The following images indicate the location of the base cover and provide a visual representation of the removal procedure.
14
Removing and installing components
After working inside your
Before working inside your
computer.
computer.
Advertisement
Table of Contents
