Conformance; Contact; Installation And Service Support; Sales Enquiries - AddSecure Edge VS5010 User Manual

14 Conformance

15 Contact

15.1 Installation and Service Support

15.2 Sales enquiries

16 Disclaimer

PDK-13010-v.6.0 Edge VS5010 and VS5051 User manual
secondary circuit which is so designed and protected that under normal and
single fault conditions, the voltage between any two accessible parts does
not exceed a safe value (42.4V AC peak or 60V DC maximum).
The terminal's interfaces has the following safety classifications:
 Dial capture interface: SELV suitable for connections to the TNV
interface of single line telecommunications equipment such as
telephones, alarm panels, etc.
 Power Interface: SELV for connection to DC Supply
 Inputs: SELV for connection to alarm output pin.
The terminal complies with the following European Directives and
standards:
 2014/53/EU (Radio Equipment Directive)
 2002/96/EC (WEEE)
 2011/65/EC (ROHS)
 No. 1907/2006 (REACH)
 EN81-28*
 EN81-20*
 EN81-70*
*Only relevant sections that apply to this terminal.
www.addsecure.com
General:
Norway
Telephone: +47 911 33 700
Email:
service.support.se@addsecure.no
Norway
Telephone: +47 911 33 700
Email:
sales.support.no@addsecure.se
The information contained in this document is supplied without liability for any
errors or omissions.
Sweden
+46 20 322 000
Telephone:
Email:
service.support.se@addsecure.se
http://www.addsecure.com
Sweden
+46 8 685 15 10
Telephone:
Email:
sales.support.se@addsecure.se
page 13