Troubleshooting - Fantom FM740 Instruction Manual

TROUBLESHOOTING

If there is a problem with the vacuum cleaner, carry out the following checks to find the
cause. If the problem still persists after the checks have been made, do not use the
vacuum cleaner to prevent the possibility of an accident occurring. Turn the ON/OFF
switch to the "OFF" position, disconnect the power cord from the wall outlet, and contact
FANTOM Customer Service at 1-800-668-9600. Or visit our website at www.fantom.com
Pr ob lem
The motor does not operate
when the ON/OFF switch is
set to the "ON" position.
Suction force is weak.
The noise is loud.
The agitator does not
operate.
TO ORDER REPLACEMENT FIL TERS CALL 1-800-668-9600
16
Caus e
The power cord plug is not
securely inserted into the
wall outlet.
The dust compartment is full.
The suction hose is blocked.
The nozzle head is blocked.
The filters (main filter, pre-
filter and the secondary
filters) are dirty.
The agitator is dirty.
The flat belt is worn or
broken.
The agitator is worn or
broken.
R em ed y
Insert the power cord plug
securely into the wall
outlet.(refer to page 5 )
Empty the dust compartment.
(refer to page 9)
Remove the blockage.
(refer to page 11)
Remove the blockage
(refer to page 11)
Clean the filters.
(refer to page 9)
Replace the HEPA filter
.
(refer to page 10)
Clean the sub-filter.
(refer to page 10)
Clean the agitator.
(refer to page 11 )
Replace the flat belt.
(refer to page 13 )
Replace the agitator.
(refer to page 14 )