Table of Contents
Advertisement
Installation and Operation, cont'd
Rack mounting the DVS 304 A
To mount the DVS 304 A in a rack, do the following:
1.
2.
Figure 2-2 — Attach the mounting brackets and install in rack
3.
2-4
DVS 304 • Installation and Operation
If feet were installed on the bottom of the DVS 304, remove them.
Attach the included rack/through-desk mounting brackets
(part #70-077-03) to the unit using eight machine screws supplied with the
mounting kit.
Insert the unit into the rack and align the holes in the mounting brackets with
the holes in the rack. Use four machine screws to attach the brackets to the
rack.
Rack Mount
Bracket
Advertisement
Table of Contents
Need help?
Do you have a question about the Four Input Video and RGB Scaler DVS 304 and is the answer not in the manual?