Connecting Pc - Furuno FS-1570 Service Manual

4. Connecting PC

The system can be controlled with the PC connected to "REMOTE" terminal, D-Sub
25P. Depending on the data type from the PC, S2 and S3 is set to as below. Note that pin
numbers to be used are different between data types.
Data Port
MIF SD
RS-232C
MIF RD
MIF A
MIF B
RS-422
MIF R1
MIF R2
S2
#3 #1
ON or OFF OFF
ON ON
3-33
S3
#2 #3 #4
OFF ON ON
ON OFF OFF
* The default is screened.
3.4 DIP Switch