Furuno FS-1570 Service Manual page 50

PWR (16P0211A)
PWR C (16P0214)
Note 1) Disconnecting flat cable from J6
To disconnect the flat cable, gently, set the locking tab to vertical position and then pull
out the cable from the connector. Excess force will damage the connector tab. To
connect the cable, reverse the above procedure.
Fig.2.6.4 Flat cable connector, J6
PRINTER
FDD (JU-226A032FCK2149)
Fig.2.6.3 Terminal unit with cover removed
2-25
JUNCTION
(Not provided on IB-583 )
DTE
FDD connecter (See note 3.)
Flat cabl
2.6 Terminal unit, IB-583
TERM CPU (16P0209A)
J6 (See note 1.)
J9 (See note 2.)
gently
J6 p.c.b