Table of Contents
Advertisement
(4) FIELD CODE LINE : When the system is connected to the Multiplexer, it is used to adjust the field code
of the Multiplexer.
(5) DISK RENEW :
YES/NO : Activates the Renew HDD option.
DISK RENEW
YES
NO
DISK RENEW
YES
NO
(6) SYSTEM UPDATE :
Notice: After the system is updated successfully, be sure reboot the system.
MENU
The values: 00~20
The default value is 13, it is suitable for most of the multiplexers.
If the field code line appears on the top of each playback channel, decrease the value.
If multiplexers can not playback properly ,increase the value.
Press NO to renew HDD and Press ENTER key to Exit.
Press Yes to Renew HDD and Press ENTER key to Exit.
YES/NO : Updates the system.
YES : Copy the update files into Compact Flash card ON PC and insert the
Compact Flash card into the slot, and then press ENTER key to update system.
The " Reading Program... ... ... " will be shown on the screen during the process.
The " Success" will be shown on the screen after system update.
29
Advertisement
Table of Contents
