EverFocus EDSR100H Instruction Manual page 30

(c) Alarm in and alarm reset
There is 1 alarm sensor in for 1 channel and 1 alarm reset in, the
alarm input can be set to Normally Open or Normally Closed by user
SENSOR 1
ALARM RESET
Alarm in
There is one alarm input. Please connect the alarm input in the same sequence as the
camera input BNC.
When alarm signal comes in, the Digital Video Recorder will do the following:
1. Display Alarm Message
2. Turn on the buzzer if the buzzer setting is on.
The ALARM in can be selected as normally open input or normally closed input:
: I
Normally Open
(N.O.)
input is opened normally, and shorted to the ground means an alarm happens.
: I
Normally Close
(N.C.)
input is shored to the ground normally, and opened input means an alarm
happens.
f the alarm input is selected as Normally Open input, then the
f the alarm input is selected as Normally Close input, then the
MENU
.
8
15
24
ALARM
CIRCUIT
2 1
9