Data Export; Still Image Copy - EverFocus EDSR-1600 Instruction Manual

9. DATA EXPORT

Insert a Compact Flash card into the Compact Flash slot on the front panel of DVR.
When inserting the Compact Flash card, make sure that insert direction is correct.
NOTE: COPY function will interrupt the recording for the duration of copy procedure.
The MAIN monitor displays the message:
"WARNING: RECORD STOPS FOR COPY FUNCTION"

9.1 STILL IMAGE COPY

The still image copy function is possible in all playback view modes.
Press the PLAY key to start playing back.
Press the PAUSE key to pause playback.
The Monitor OSD shows "PAUSE ON (1~9 for EDSR-900, 1~16 for
PAUSE
EDSR-1600)" . The displayed number shows the active channel for the
COPY function.
Turn the JOG Dial clockwise to choose your desired image.
While displayed as your desired image of choice ,
press the COPY key. The " Copying ... " will be shown on the screen during
the process.
COPY
Notice:
Copied images are stored as a single picture. Copied files are saved as .JPG file.
Notice1:
Please wait after the message "DONE " about 5 seconds before removing CF-card
for ensure correct finish of write process.
Notice2: If system responds "wrong system file format", please go to CF
FORMAT option of SYSTEM menu for renewing CF card.
Notice3: Recording stop, when system is copying.
39
DATA EXPORT