6.9 RECORD SETTING MENU
In NORMAL RECORDING MENU we define
(1)
NORMAL RECORD:
SPEED : Choose the normal recording speed. Maximum 60 (NTSC) / 50 (PAL).
QUALITY: Define the video picture' s quality by selecting a compression rate.
There are six quality levels for recording
LOWER
LOW
BASIC
STANDARD : 27 KB
HIGH
SUPERIOR : 35 KB
DISK FULL: Set REWRITE or STOP when HDD is full.
(2)
ALARM RECORD (for Alarm In and Motion detection):
OP (Operation): Select ON to activate or OFF to deactivate alarm recording.
SPEED : Choose the alarm and motion recording speed. Maximum 60 (NTSC) / 50 (PAL).
QUALITY: Define the video picture' s quality by selecting a compression rate.
NOTE: The recording rates are for the total system. The single camera recording rate is:
Camera recording rate = System recording rate / Number of connected cameras
Example: Recording rate 50 IPS, 6 connected cameras: ~ 8,3 IPS / camera
NOTE: For alarm recording, see also remarks in (4) PERMANENT RECORDING.
Turn the JOG dial clockwise or counter-clockwise to select the options.
Press ENTER key to confirm the option and move to next column.
ENTER
Press MENU key to return to Main Menu, press again to leave Set up Menu.
MENU
RECORD SETTING MENU
NORMAL RECORD
: 50 IPS
SPEED
: STANDARD
QUALITY
: REWRITE
DISK FULL
ALARM RECORD
ON
OPERATION
: 50 IPS
SPEED
: STANDARD
QUALITY
PRE-ALARM RECORD
ON
OPERATION
PREMANENT RECORD
OPERATION
: ON
SPEED
: 0,01 IPS
: 15 KB
: 19 KB
: 23 KB
: 31 KB
20
MENU