Table of Contents
Advertisement
5.
Enter the desired password in the Password field.
6.
(Optional.) Tap
7.
Select Show advanced options to configure the HTTP proxy for the Browser.
8.
Select Connect.
Once the connection has completed successfully, the prompt "Connected" appears under the corresponding SSID.
Adding a wireless network manually
If your gateway/router has SSID broadcast disabled, it doesn't appear in the scanning results. Then you must manually add a
wireless network.
Before you begin
Get the available wireless network information from your system administrator. Make sure that the Wi-Fi mode is activated.
Procedure
1.
Swipe left or right to go to the second idle screen, go to Settings > Basic Settings > Wi-Fi.
2.
Select
> Add.
3.
Enter the desired value in the Network SSID field.
4.
Tap the desired value from the Security field.
If you select WEP or WPA/WPA2 PSK, enter the password.
If you select 802.1x EAP, tap the desired value from the EAP method field, and enter additional information.
5.
(Optional.) Tap
6.
Select Show advanced options to configure the HTTP proxy for the Browser.
7.
Select Save.
Viewing the wireless network information
You can view the detailed wireless network information, such as Profile Name, SSID and Signal Strength.
Procedure
1.
Swipe left or right to go to the second idle screen.
2.
Go to Settings > Basic Settings > Wi-Fi > Wi-Fi Status.
3.
(Optional.) Drag up and down to scroll through the list of wireless network information.
Disconnect from a wireless network
You can disconnect the wireless network connection from your phone.
Procedure
1.
Swipe left or right to go to the second idle screen.
2.
Go to Settings > Basic Settings > Wi-Fi.
3.
Tap the connected SSID (the top one).
4.
Select Forget.
Tip: You can also disconnect from the wireless network by deactivating the Wi-Fi mode.
to make the password visible.
to make the password visible.
User guide
80
- Quick Links:
- Transferring Calls
Hide quick links:
Advertisement
Table of Contents
