Resetting To Factory Settings; Updating The Phone Configuration; Clearing User's Personalized Configuration Settings - Verizon One TalkT67LTE User Manual

Procedure
1.
Swipe left or right to go to the second idle screen.
2.
Go to Settings > Basic Settings > Reboot > Reboot. The phone prompts you to reboot the phone or not.
3.
Select OK.
Tip: You can also long press the * key on the keypad when the phone is idle to reboot the phone.

Resetting to factory settings

When some issues occur on your phone and you have tried all troubleshooting suggestions but still do not solve the problem,
you can reset your phone to factory configurations.
This operation will delete all your personal configuration settings, and reset all settings to the factory defaults.
Check with your system administrator if the personalized settings are kept before resetting your phone to factory settings.
Procedure
1. Swipe left or right to go to the second idle screen.
2. Go to Settings > Advanced (default password: @N3ta!k2@2*
3. Select Reset to factory settings.
The phone prompts you to reset the setting or not.
4. Select OK.
The phone begins resetting.
Tip: You can also long press the Redial key when the phone is idle.
After reset, the screen prompts "Welcome Initializing...Please wait". The phone will be reset successfully after startup.
Note: Reset of your phone may take a few minutes. Do not power off until the phone has started up successfully.

Updating the phone configuration

Your system administrator may ask you to update the configuration for your phone to apply any changes to system settings,
which you can do without restarting it.
Procedure
1. Swipe left or right to go to the second idle screen.
2. Go to Settings > Basic Settings > Update Configuration.
3. Enter the provision information in the corresponding field.
4. Save the change.
The phone prompts you whether to provision now.
5. Select OK.

Clearing User's personalized configuration settings

You can clear the personalized configuration settings manually on the phone.
Before you begin
Your system administrator has enabled the phone to keep the user's personalized settings after auto provisioning.
) > Reset Configuration.
User guide
83