Verifying Your Connected Power Sensor; Figure 1-9 Agilent Connection Expert With A List Of Instrument I/O On The Pc; Figure 1-10 Agilent Interactive Io Dialog Box - Agilent Technologies U2000 Series Operating And Service Manual

1 Getting Started

Verifying Your Connected Power Sensor

1 To verify your connected power sensor, go to Start > All Programs > Agilent
2 Your connected power sensor will be detected and shown on the

Figure 1-9 Agilent Connection Expert with a list of instrument I/O on the PC

3 Select the U2000 USB sensor on the list of USB device connected to the

Figure 1-10 Agilent Interactive IO dialog box

16
IO Libraries Suite > Agilent Connection Expert to launch Agilent Connection
Expert.
Instrument I/O on this PC panel as shown in the following figure.
PC and right- click. A context menu will appear and select Send Command
To This Instrument and the Agilent Interactive IO dialog box will appear as
shown below.
U2000 Series Operating and Service Guide