Ai / Dg Displayable Parameters - uAvionix AV-30-C Manual

interfaced, this page also allows control and monitoring of the transponder
as detailed in §7.7 - Reversionary AI. This mode page cannot be
customized by the pilot.

7.6 AI / DG Displayable Parameters

The following table shows which data fields can be presented when
operating in AI and DG modes.
The presentation type of graphical indicates that the data is presented in a
graphical format (dial, tape, bug, etc.), while a presentation type of text
indicates that a textual presentation is available.
The OAT field indicates that an OAT probe must be installed for this
parameter to be selectable.
The GPS field indicates that a connection to an external GPS navigator is
required for the parameter to be selectable.
Data Type
Blank Overlay Field
Attitude
Non-Slaved Heading
Bus Voltage
G Load Value
G Load Indicator
Indicated Airspeed
Barometric Corrected
Altitude
Angle of Attack
Vertical Trend Indicator
Vertical Speed
Set Altitude
UAV-1003946-001, AV-30-C Pilot's Guide
Table 1 - Data Overlay Types vs Operational Mode
Presentation
N/A
Graphical
Graphical
Textual
Textual
Graphical
Textual
Textual
Graphical
Graphical
Textual
Textual
33
AI Mode DG Mode
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ 
✓ 
✓ 
✓ 
✓ 
✓ 
✓ 
OAT GPS
Revision D
Page