Operational Aspects; Accessing Reversionary Ai - uAvionix AV-30-C Manual

The display scale is adjusted by rotating the rotary knob and represents
the display distance from the ownship icon to the outer compass ring. The
following scales may be selected for display:
All GPS deviation data is limited to VFR operations only, as
indicated by the Nav Mode indication ("VFR").

7.5.5 Operational Aspects

The following applies to operation in DG mode.
• As with the AI mode, three customizable pages can be setup by the
pilot. Each page can be configured to show any of the above three
display modes.
• Non-Slaved Heading mode requires the pilot to set the initial heading
and correct the heading as necessary based on the compass. The
system will preserve the last set heading on shutdown.
• GPS HSI and ARC modes are for VFR operations only. No vertical
deviations are shown, and lateral deviations are not scaled for
approach / IFR operations.
• Air data / temperature related parameters (TAS, DALT, OAT) are only
available if the DG has been connected to and OAT probe, otherwise
they will not be selectable for display.
•
The currently displayed GPS track may optionally be gyroscopically
stabilized, allow smoother operation when in turns. This option is
configured in the pilot accessible Setup Menu (GPS Track
Stabilization).

7.5.6 Accessing Reversionary AI

A reversionary style display of attitude and slip is available from the traffic
page. Push and release the right button to engage this screen. Push and
release the right button again to disengage. When a transponder is
UAV-1003946-001, AV-30-C Pilot's Guide
Selectable Display Scales:
1, 2, 5, 10, 20, 50 and 100 N Mi
32 Revision D
Page