Airspeed Indicator - uAvionix AV-30-C Manual

7.4.4 Airspeed Indicator

Indicated airspeed is configured for display on the left side of the screen.
The configured units (KTS or MPH) are displayed below the speed value.
The inner arc is a color-coded v-Speed band that rotates to show the
configured v-Speed limits against the non-moving white tic mark. The
lower arc portion below Vs1 provides a red colored slow-speed band that
is only displayed when the airspeed has been above Vs1 for a given flight.
The color of the indicated airspeed numerals will turn yellow when
operating in the yellow speed arc, red when operating in a red speed arc,
but are otherwise white.
UAV-1003946-001, AV-30-C Pilot's Guide
Figure 14 – AI Mode, IAS Indicator
Color Coded
Presentation
Figure 15 - AI Mode, V-Speed Limits
On initial startup, the airspeed field will be dashed while
sensor stabilization occurs.
Airspeed display units and v-Speed limits are configured
during installation and are not pilot accessible.
Vne
Vno
Vfe
Vs1
Vs0
24 Revision D
Page