Ddae Verification Procedure - Morita veraviewepocs 2d Instructions For Use Manual

DDAE Verification Procedure

1. DDAE Verification
DDAE (Digital Direct Auto Exposure) is verified by this procedure.
1) DDAE Verification Flowchart
Set the test pieces
Setup i-Dixel
Make a panorama scan
Check DAP value
Switch the test piece
Make another scan
Check and compare DAP values
2) Warning and Caution
If any errors occur during the verification procedure, turn off Veraviewepocs immediately.
After checking the conditions, restart the procedure from "Start".
Start
↓
↓
↓
↓
↓
↓
↓
↓
End
87