Morita veraviewepocs 2d Instructions For Use Manual page 103

Other System Requirements
Hardware Windows based Personal Computer (Minimum specifications)
Operating system:
CPU:
Memory:
HDD:
Video board:
Network protocol:
Network interface:
Port occupied:
Others:
Display:
Standard:
Hub
10 Base-T, 100 Base-TX
Standard:
Recommended Hub, for example
Manufacturer:
Type:
Storage Device
Standard:
Other equipment connected to PC
Standard:
Application Software
Microsoft Windows 2000 with Service Pack or later.
Intel Pentium IV 1.7GHz or higher, or compatible.
RAM 512MB
HDD 20GB or more are recommended.
Video capture board
resolution of 1024 × 768 and color depth of 24bit
TCP/IP with static IP address.
Universal purpose 10BASE-T Ethernet network interface board
69/udp, 2102/tcp, 2102/tcp
Network board, CD-ROM drive.
17 inch TFT LCD
16 million colors
1024 × 768 pixels or better
IEC60950-1, IEC 62368-1, or IEC60601-1
EMD regulation
Related UL standard (addition to USA)
Related C-UL standard (addition to Canada)
Local regulations
IEC60950-1 or IEC 62368-1 if it is used in non-patient vicinity
IEC60601-1 or
IEC60950-1 or IEC 62368-1 with enclosure leakage current is
conformed with IEC 60601-1.
EMD regulation
Related UL standard (addition to USA)
Related C-UL standard (addition to Canada)
Local regulations
Bay Networks
Bay Stack 350T
Patient data can be saved safely. MO or CD-R disk drive is
recommended.
IEC60950-1 or IEC 62368-1 if it is used in non-patient vicinity
EMD regulation
Related UL standard (addition to USA)
Related C-UL standard (addition to Canada)
Local regulations
IEC60950-1 or IEC 62368-1 if it is used in non-patient vicinity
EMD regulation
Related UL standard (addition to USA)
Related C-UL standard (addition to Canada)
Local regulations
Application software for image processing or data base is provided by J. MORITA
OFFICE.
It shall be used with above Windows based computer specifications.
It conforms to 93/42/EEC (in EU), IEC62304 and 21 CFR (in USA), Medical device
regulations (in Canada).
If another application software is used, it must conform to the above regulations and
standards, and must match the Dixel driver from J. MORITA MFG. CORP.
Ask your nearest J. MORITA Office for the appropriate interface.
99