Subaru BRZ Eyesight 2022 Owner's Manual page 92

Conventional Cruise Control
■ Restoring the previously set vehicle speed
The previously set vehicle speed is stored in memory. To restore that vehicle speed, push
the cruise control switch to the "+ RES" side.
changes from white to green.
You can restore the set vehicle speed when the previously set vehicle speed has been
stored and the current vehicle speed is approximately 20 mph (30 km/h) or more.
• The vehicle speed stored in memory is erased in the following circumstances:
- The cruise control is turned off by pressing the ON-OFF switch.
- TRAC system or Vehicle Stability Control (VSC) is activated.
- The cruise control mode was switched from Conventional Cruise Control to
Adaptive Cruise Control.
• The vehicle drives constantly and correspondingly to the set vehicle speed
between 20 mph (30 km/h) and 90 mph (145 km/h)*.
*: For Mexico models, 30 km/h and 200 km/h.
• If there is no vehicle speed stored in memory (previous vehicle speed), the
current vehicle speed is set when the cruise control switch is pushed to the "+
RES" side.

Page 85
92
S04130
NOTE
(Conventional Cruise Control indicator)
Green
H00038