Subaru BRZ Eyesight 2022 Owner's Manual page 83

How to use Conventional Cruise Control
■ Setting Conventional Cruise Control
(1) Setting Adaptive Cruise Control to standby status
Press the ON-OFF switch. At this time,
and the following distance setting indicator are displayed on the combination meter dis-
play. The set vehicle speed display will read "- - - MPH (- - - km/h)".
When the ON-OFF switch is pressed, the initial cruise control mode is always Adaptive
Cruise Control.
(2) Switch to Conventional Cruise Control.
Press and hold the
onds or longer to switch from Adaptive Cruise Control to Conventional Cruise Control. A
notification sounds 1 short beep.
At this time, the following distance setting indicator on the combination meter display
turns off and
S04128
(Following distance setting) switch for approximately 2 sec-
(Conventional Cruise Control indicator) (white) is displayed.
S04132
Conventional Cruise Control
(Adaptive Cruise Control indicator) (white)
Follow-
ing dis-
tance
setting
indicator
(icon)
Follow-
ing dis-
tance
setting
indicator
Conven-
tional
Cruise
Control
indicator
(white)
Adap-
tive
Cruise
Control
indicator
(white)
Set
vehicle
speed
Your
vehicle
indicator
H00032
H00036
83