Table of Contents
Advertisement
Pre-Collision Braking System
• Neither first braking nor secondary braking will operate in the following cases.
- The vehicle speed is approximately 1 mph (1 km/h) or less (When the select
lever is in the "N" position and your vehicle speed is approximately 2 mph (4
km/h) or less) or 100 mph (160 km/h)* or more.
*: For Mexico models, 200 km/h.
- Vehicle Stability Control (VSC) is active.
• If the system detects the brake lights of the vehicle in front, your vehicle will
start decelerating earlier than if it does not.
• There are some cases where the first braking is applied for a longer period of
time. One of the reasons for this is due to a large speed difference with an
obstacle in front. In those cases, stronger or weaker braking control may be
activated.
After the Pre-Collision Braking System operation, a message appears and stays on the
combination meter display for a certain period of time.
34
NOTE
H00009
Advertisement
Table of Contents
