Conventional Cruise Control
To set the ready status:
Conventional Cruise Control can be activated when all of the following conditions are
met and
(READY indicator) is displayed on the combination meter display.
- Both the driver's door and the front pas-
senger's door are closed.
- The driver's seatbelt is fastened.
- The select lever is in the "D" or "M"
position.
- The brake pedal is not depressed.
- The road is not on a steep slope.
- The steering wheel has not been turned
significantly in either direction.
- The vehicle speed is between approxi-
mately 20 mph (30 km/h) and 90 mph
(145 km/h)*.
*: For Mexico models, approximately 30 km/h and 200 km/h.
- Parking brake is released.
- The driving mode is set to normal mode or sport mode.
Refer to the vehicle Owner's Manual for details.
- Pre-Collision Braking System is not turned off during TRACK mode.
Refer to the vehicle Owner's Manual for details.
- TRAC system and Vehicle Stability Control (VSC) are not set to off.
Refer to the vehicle Owner's Manual for details.
84
READY
indicator
H00037