HAMPTON BAY GSM00223A Use And Care Manual page 6

l
Assembly (continued)
2
ATTACHING THE CROSSBAR
Attach the side top bars (C) with the upturned holes to the connector bars (A & B) using M6x60 bolts and washers (DD).
Attach the center lengthways bar (D) with the upturned holes to the connector bars (A & B) using M6x65 bolts and washers (CC).
Attach the lengthways bars (E) with the upturned holes to the connector bars (A & B) using M6x60 bolts and washers (DD).
Fully tighten all of the bolts using the hex wrench (JJ).
Note: The first fabric hanger on the center lengthways
bar (D) is the rolling wheel, others are the plastic wheel.
DD
A&B
C
E
E
A&B
A&B with
magnet plate
Plastic wheel
D
CC
D
A&B with
magnet plate
DD
E
E
DD
6
Rolling wheel
C