Related Manuals for Monoprice BitPath AV 16227
Summary of Contents for Monoprice BitPath AV 16227
- Page 1 MONOPRICE BitPath AV™ SDI Extender over Single Cat6 Cable, 120m P/N 16227 User's Manual...
-
Page 2: Safety Warnings And Guidelines
SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference. This device is intended for indoor use only. ... -
Page 3: Customer Service
If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm PT, Sat-... -
Page 4: Package Contents
PACKAGE CONTENTS Please take an inventory of the package contents to ensure you have all the items listed below. If anything is missing or damaged, please contact Monoprice Customer Service for a replacement. 1x Transmitter 1x Receiver 2x AC Power Adapters... - Page 5 Transmitter Rear Panel 1. DC 5V: DC barrel connector for attaching the included AC power adapter. 2. Reset: Button for restarting the transmitter. 3. BitPath AV™ TX: RJ45 connector for attaching the Ethernet cable. 4. IR Out: 3.5mm jack for connecting the IR transmitter. 5.
- Page 6 INSTALLATION AND OPERATION Perform the following steps to connect the BitPath AV™ system: 1. Place or mount the transmitter and receiver in their desired locations. 2. Using an RG-6 coaxial cable with BNC connectors (not included), plug one end into the SDI input on your display, then plug the other end into the SDI Output (5) connector on the receiver.
-
Page 7: Troubleshooting
the Data Transmission LED (2) on both the transmitter and receiver front panel will start flashing slowly to indicate that a connection is being established. Once the connection is completed, the Connection LED (3) on each unit will illuminate. 9. Start playing video content on your video source device. As data is being transmitted, the Data Transmission LED (2) on each device will start flashing rapidly, indicating that data is being transmitted and received. -
Page 8: Technical Support
TECHNICAL SUPPORT Monoprice is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable Tech Support Associates. -
Page 9: Regulatory Compliance
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Modifying the equipment without Monoprice’s authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.
Need help?
Do you have a question about the BitPath AV 16227 and is the answer not in the manual?
Questions and answers