Understanding The Status Of The Power Button And Setup Button Indicator Lights - Lexmark Optra Compute 500 User Manual

Learn about the device
Part
3 Setup button
4 Power adapter port
5 Ethernet port
6 Ethernet port indicator
lights
7 USB 2.0 HS port
8 USB 3.0 SS port
9 HDMI port
10 GPIO port
11 Headphones jack
12 Antenna connectors
Understanding the status of the power button and setup
button indicator lights
Setup button light
Off
Flickering (irregular blinking)
Blinking
Off
On
Lexmark Confidential until announced
Function
•
Enroll the device in Optra Portal—Press the button briefly.
•
Reset the device to its factory default settings—Press and hold the button as
the device is being turned on until the power button blinks rapidly.
Connect the device to the included power adapter and to a properly grounded
electrical outlet.
Connect the device to a network.
Check the network connection status.
Notes:
•
The light on the left indicates connection.
•
The light on the right indicates activity.
Attach a supported USB device, such as a flash drive.
•
Connect the device to a computer to access the Embedded Web Server and
manage on-device settings.
•
Attach a supported USB device, such as a flash drive.
Transmit video and audio signals to an HDMI monitor.
A general purpose interface that is used for input, output, or both.
Insert headphones or a speaker.
Connect the antennas to the device.
Power button light
Blinking
Blinking
On
On
Flickering (irregular blinking)
Blinking
Device status
Starting or shutting down
No network connection to the hub
Not enrolled
Enrolling
Enrolled
Resetting to factory default settings
Updating firmware
8