Optra Vz1000/Vz5000 - Lexmark Optra Compute 500 User Manual

Set up, install, and configure
Note: The wireless settings appear only if the MarkNet network adapter is attached to the device or if the
device has built-in Wi-Fi.

Optra VZ1000/VZ5000

Notes:
•
Optra VZ1000/VZ5000 supports wall mounting. For more information, see
wall" on page 30 before proceeding with setting up the device.
•
If the device is mounted with the ports facedown, then hold the device in place when making cable
connections to keep it from being dislodged.
1
Connect the antennas to the sides of the device.
2
Connect the power cord to the device, and then to the electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power
adapter and/or power cord to an appropriately rated and properly grounded electrical outlet that is
near the product and easily accessible.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, make sure that the
power cord is completely seated in the appliance inlet of the power adapter or in the device itself.
Lexmark Confidential until announced
"Mounting the device on a
15