Learn about the device
Learn about the device
Optra Compute 500/550
Warning—Potential Damage: To avoid loss of data or device malfunction, do not touch the USB cable or the
device in the areas shown while actively operating.
Part
1
Power button
2
Setup button
3
Headphones jack
4
USB port
5
Ethernet port
Lexmark Confidential until announced
Function
Turn the device on or off.
•
Enroll the device in Optra Portal—Press the button briefly.
•
Reset the device to its factory default settings—Press and hold the button as the
device is being turned on until the power button blinks rapidly.
Insert headphones or a speaker.
Attach a supported USB device, such as a flash drive or the MarkNet
adapter, which is purchased separately.
Connect the device to a network.
5
TM
network