Learn about the device
Part
6
USB device port
7
Ethernet port indicator
lights
8
Power cord socket
Optra Compute CX1000
Warning—Potential Damage: To avoid loss of data or device malfunction, do not touch the USB cable or the
device in the areas shown while actively operating.
Part
1
Power button
2
Setup button
3
Headphones jack
4
Power adapter port
5
USB 2.0 port
6
Ethernet port
7
Ethernet port indicator
lights
Lexmark Confidential until announced
Function
Connect the device to a computer to access the Embedded Web Server (EWS) and
manage on-device settings.
If the only available connection is a Wi‑Fi network, then use the EWS to configure
Wi‑Fi connection. You can also use the EWS to configure the Ethernet network
settings.
Check the network connection status.
Notes:
•
The light on the left indicates connection.
•
The light on the right indicates activity.
Connect the device to a properly grounded electrical outlet.
Function
Turn the device on or off.
•
Enroll the device in Optra Portal—Press the button briefly.
•
Reset the device to its factory default settings—Press and hold the button as the
device is being turned on until the power button blinks rapidly.
Insert headphones or a speaker.
Connect the device to the included power adapter and to a properly grounded
electrical outlet.
Attach a supported USB device, such as a flash drive.
Connect the device to a network.
Check the network connection status.
Notes:
•
The light on the left indicates connection.
•
The light on the right indicates activity.
6