Table of Contents
Advertisement
Convection fan
Oven vent
Installing Oven Rack Supports
AlwAys instAll oven rACk sUpport before
tUrninG on the oven (when the oven is
Cool).
To install oven rack support, insert the supports
by pushing them downward into the two brackets on
each side of the oven interior, as shown below.
To remove the oven rack support for a self-clean
cycle, pull up the support to disengage them from the
brackets. If the rack supports are not removed, the
self-clean cycle won't start.
Control panel
Oven door latch
Broiling element
Oven rack sliders
Oven racks
Oven rack support
Oven light
Glass oven door
Door
handle
Oven Rack Positions
This oven is equipped with ladder rack supports with
8 positions to accommodate precisely every mode of
cooking.
Oven Vents Location
The oven is vented above each door. When the oven
is on, warm air is released through the vents. This
venting is necessary for proper air circulation in the
oven and good baking results.
Features
Broiler pan
Broiler pan grid
Oven Vent
Warm Air
5
Convection
roasting rack
Rack positions
Position 1
(Non-SLIDING
rack only)
Advertisement
Table of Contents
