Cisco 7960G User Manual page 8

Dial the number of the next party you want to add to the conference call.
Step 5
Repeat Steps 3 through 5 to connect additional callers.
Step 6
Note
Place a Call from Your Local Directory
To access the local phone directory established by the system administrator, perform the following steps:
Press the Directories button.
Step 1
Press the Navigation Up or Down button to select the local directory.
Step 2
Press the Navigation Up or Down button to select the Last, First, or Number field search option.
Step 3
Using the dial pad, enter the last name or first name for the entry.
Step 4
When entering letters, select the appropriate number key of the letter you want, and press that key a
number of times that equals the position of the target letter. For example, to enter a B, press the 2 key
two times, and to enter a C, press the 2 key three times. Use the backspace (<<) soft key to erase
characters that were entered incorrectly.
Step 5 Press the Search soft key to find your selection.
If your search results in multiple listings, use the Navigation Up or Down button to select the correct
Step 6
number.
Step 7 Press the Dial soft key to dial the selected number.
Program Personal Speed-Dial Buttons
Once an administrator has defined one or more speed-dial instances for a Cisco IP phone, you can
reprogram numbers that are not locked or can program numbers into an instance that has an empty dial
string by following these steps:
Select an available phone line by lifting the handset, by pressing the NewCall soft key, or by pressing a
Step 1
line button. Listen for the dial tone.
Press the pound key (#).
Step 2
Press the speed-dial button that you want to program. A short beep confirms that you are starting to
Step 3
program this button.
Enter the speed-dial number. The digits will appear on the phone display. When you are entering
Step 4
speed-dial numbers on a Cisco IP Phone 7960G, use the backspace (<<) soft key to erase digits that were
entered incorrectly.
To remove a speed-dial number without replacing it with a new one, press the pound key (#).
Step 5 Press the same speed-dial button a second time to indicate that you have finished entering the speed-dial
digits and to store the new speed-dial number.
Step 6 Hang up the handset, or press a new speed-dial button and repeat the process.
Cisco IOS Telephony Services IP Phone User Guide, Version 3.0
1-8
Chapter 1
When the call originator disconnects, additional parties cannot join the call in progress.
Cisco IP Phone 7960G and Cisco IP Phone 7940G for Cisco IOS Telephony Services
78-15706-01