Table of Contents
Advertisement
7. INPUT SELECTION SWITCH
The rotary input selector switch
selects which input signal(Phono,
CD, Tuner or Aux/USB)is fed to the
power amplifier. The selected signal
is also fed to the "Tape out" sockets
for recording.
8. VOLUME CONTROL
The volume control adjusts the
overall loudness level of the sound. It
has no effect on the level of the
signals fed to the TAPE OUT jacks
for tape recording. The Volume
control is designed for accurate
tracking of its two channels, so that
the stereo balance will not shift
noticeably as the loudness of the
sound is varied.
9
Advertisement
Table of Contents
